عن القسم عربي

هندسة المواد الأحيائية والتعويضات الأصطناعية

نبذة عن الفرع:

تأسس فرع هندسة المواد الاحيائية والتعويضات الاصطناعية في قسم هندسة المواد عام 2020, مدة الدراسة هي اربع سنوات بضمنها تدريب عملي للطلبة في المستشفيات والمستوصفات الصحية ومراكز التاهيل الطبي والعلاج الطبيعي يكون الخريج من هذا الفرع قادر على المساهمة في تصميم وتصنيع وتطوير المواد والمستلزمات الطبية والاعضاء البشرية التعويضية واكتساب المهارات الاساسية التي تؤهله لتوفير الاحتياجات والمتطلبات الاساسية للمؤسسات الصحية الحكومية وتغطيتها لهم.

الرؤيا والرسالة والاهداف

الرؤيا:

تسعى رئاسة فرع هندسة المواد الاحيائية والتعويضات الاصطناعية ان يكون هذا الاختصاص واحد من اهم وأبرز التخصصات الهندسة في الجامعات العراقية والعالمية في الاعوام القليلة المقبلة. كما وتتطلع رئاسة الفرع بان يكون رائدا ومتميزا على المستوى المحلي والعالمي في المناهج الدراسية والرصانة العلمية وذلك من خلال مواكبة تطور البحث العلمي ورفع مستوى المشاركة في بحوث الهندسة الاحيائية والتعويضات الاصطناعية خلال المؤتمرات والمجلات العالمية مع الجامعات الرصينة والمراكز البحثية الأكاديمية الاخرى في البلدان المتقدمة في هذا الاختصاص وكذلك فتح افاق التعاون الطبي والصحي مع المؤسسات الصحية الحكومية، وبرامج التبادل الأكاديمي من خلال الابتكارات والاختراعات في مختلف المجالات الطبية.

الرسالة:

يسعى الفرع الى تخريج مهندسين كفؤين مختصين بهندسة المواد الاحيائية والتعويضات الاصطناعية يجمعون بين العلوم الهندسية والطبية والاحيائية ومؤهلين مهنيا للعمل بمستوى عالي في جميع القطاعات والمؤسسات الصحية بما يتلائم وحاجة المجتمع والبلد لذلك, كما ويسعى الفرع الى توفير بيئة عمل جيدة للطلبة وأعضاء الهيئة التدريسية والتركيز على المعايير الأكاديمية والمهنية العالية داخل الحرم الجامعي وخارجة وتشجيع تبادل المعرفة والعمل الجماعي وتدريب المهندس على تحليل وحل المشكلات الطبية الاحيائية في المستشفيات والمراكز الصحية كافة وإدارتها وفق الاسس العلمية الحديثة التي تراعي المجالين الطبي والهندسي من خلال التعاون مع الكوادر الطبية فيها, وذلك من خلال اختيار المواد الاحيائية التي تستخدم داخل وخارج جسم الانسان باعلى المواصفات واقل تكلفة.

الاهداف:

  • تخريج مهندس مواد ملم بالمواد الأحيائية الطبية (المعدنية، السيراميكية، البوليمرية، المتراكبة) قادر على تصميم وتصنيع الأعضاء التعويضية والمزروعات والأنسجة والمواد الطبية تلبية لسوق العمل وحاجة البلد بسبب الحوادث والحروب.
  • تخريج مهندس قادر على فحص المواد وتوصيفها لغرض الاختيار الأمثل لمواد أحيائية طبية ذات أستخدام خارجي مثل (كانابيب القسطرة, أنابيب غسل الكلية, العدسات, الكمامات, القفازات الطبية, السرنجات الطبية ....الخ) او ذات أستخدام داخلي مثل (مفاصل الجسم المختلفة, شبكات القلب, الأنسجة الصناعية, الصمامات, الأوتار وغضاريف الفقرات ....الخ).
  • تخريج مهندس قادر على تصميم وتصنيع الأعضاء والتعويضات الأصطناعية بافضل الخواص واقل الكلف من مواد مستدامة ذات عمر أطول مثل (الساق, اليد, الاذن ....الخ).
  • تخريج مهندس ملم بالمواد المستخدمة في مجال طب الأسنان من حيث صناعة وزراعة الأسنان والتعويضات الاخرى مثل (الحشوات, مواد طقم الأسنان, مواد تقويم الأسنان ....الخ).

الجدوى الاقتصادية من أستحداث الفرع:

  • توفير الكلف الاقتصادية الناتجة عن استيراد المواد احيائية الطبية المستخدمة في مجال الاطراف الصناعية والمفاصل من خلال تحضير وتصنيع مواد محلية باقل كلف واعلى المواصفات.
  • توفير الكلف الاقتصادية الناتجة عن استيراد المواد الاحيائية الطبية المستخدمة في مجال طب الاسنان (الحشوات , مواد تقويم الاسنان , المزروعات ومواد طقم الاسنان , مواد تعويض الوجه والفكين).
  • توفير الكلف الاقتصادية الناتجة عن استيراد الانسجة التعويضية لانسجة الجسم الوظيفية (scaffold ).
  • توفير الكلف الاقتصادية الناتجة عن استيراد المعدات الطبية الخارجية كانابيب القسطرة واجهزة الاعطاء (المغذي), السرنجات, القفازات, الكمامات, حفظ علب الادوية ... الخ ).
  • توفير الكلف الاقتصادية الناجمة عن استيراد الاجزاء الداخلية الوظيفية داخل الجسم مثل الصمامات القلبية والاوردة والشرايين والشبكات... الخ ).
  • خدمة المجتمع وذلك من خلال المشاركة في ايجاد الحلول العملية للمشاكل التي تواجهها مؤسسات الدولة واهمها وزارة الصحة ودوائرها والمستشفيات والمراكز الصحية ومراكز التاهيل الطبي بشكل مباشر وذلك بتهيئة مهندسين قادرين على انتاج و تصميم المواد اعلاه محليا باقل الكلف وافضل المواصفات من خلال اجراء البحوث العلمية والدراسات النظرية والتطبيقية.
  • دعم سوق العمل من خلال توفير فرصة انشاء معامل ومصانع اهلية لتصنيع المواد الاحيائية الطبية اعلاه مما يدعم تشغيل المهندسين المتخرجين في هذا المجال او مجالات اخرى في القطاع الخاص وتوفير فرص عمل لهم ضمن الاختصاص.

 

بحوث أ.م. د. نيفين جمال عبدالقادر

 

 

 

Year of Publishing

IF

Name of Journal

Single/Common (names of researchers)

Name of Research

No.

2024

0.3

Iraqi Journal of Applied Physics

Niveen Jamal Abdulkader,

Ghufran J Matrood, Nahedh M Ali

Determination of Electrical Conductivity of Aluminum Nano Films prepared by Flame Thermal Spray

1

2024

0.7

AIP Conference Proceedings

Niveen Jamal Abdulkader,

Ahmed Mudhafar Hashim,

Zainab Aws

Weibull statistical analysis of the tensile properties of cow tail hair animal natural fibers

2

2024

0.8

Latin American Applied Research-An international journal

Niveen Jamal Abdulkader,

Payman Suhbat Ahmed

Reusing manufacturing wastes as crack retardant

3

2023

1.2

Materials Research Express

Niveen Jamal Abdulkader,

Payman Sahbah Ahmed, Shahad Abduladheem Jabbar

The investigation on properties of Ti-5Si and Ti-5Nb implant alloys coated by bioactive based composite coating

4

2023

2

Journal of Nanostructures

Niveen Jamal Abdulkader,

Hanaa A Al-Kaisy

Characterization of Ni-base Matrix Composite Coating produced by Thermal Spray Technique

5

2023

2

Journal of Nanostructures

Niveen Jamal Abdulkader,

Payman Suhbat Ahmed, Shahad Abd alraheem

Study the properties of Ti alloy by addition Nb and Si alloying elements for Orthopedic implant

6

2023

 

ETJ_Volume 41_Issue 6_Pages 870-885

Niveen Jamal Abdulkader,

Payman Suhbat Ahmed, Shahad Abd alraheem

Applying Nanocomposite Coatings to Improve Orthopedic Alloys by Using Multiple Flame Spray

 

7

2023

2

Multidiscipline Modeling in Materials and Structures

Niveen Jamal Abdulkader,

Payman Suhbat Ahmed

Blister test to evaluate the multiwall carbon nanotubes (MWCNT)-Woven carbon fiber-reinforced epoxy used for repairing pipelines

8

2023

2

International Journal of Cast Metals Research

Niveen Jamal Abdulkader,

Mayyadah Shanan Abed

Influence of SiC nanoparticles addition on the microstructure and mechanical properties of stir-casted Zn-Al alloy

9

2022

0.7

AIP Conference Proceedings

Niveen Jamal Abdulkader,

Fadhil Abass,

Sarmad Shriq

Corrosion protection of mild steel by using recycling materials as inhibitors in salt solution

10

2023

0.7

AIP Conference Proceedings

Niveen Jamal Abdulkader,

Fadhil Abass,

Sarmad Shriq

Comparison Corrosion Inhibition of Organic and Inorganic

Waste Materials fοr Mild Steеl in 3.5wt% Nacl Solutiοn

11

2023

0.7

AIP Conference Proceedings

Niveen Jamal Abdulkader,

Aseel Mahmood

Corrosion characterization of AA6061 Al-alloy based

composites reinforced with different recycled materials

12

2021

0.7

IOP Conference Series: Materials Science and Engineering

Niveen Jamal Abdulkader,

Ahmed Ameed, Aveen Yaur

Study of Wear Properties of Recycled Composite Zn-Al Alloy Reinforced with Hybrid Nanoparticles

13

2021

2.2

Materials Today

Niveen Jamal Abdulkader,

Ahmed Ameed, Aveen Yaur

Effect of hybrid nanoparticles on compression strength of recycled composite Zn –Al alloy

14

2021

 

Engineering and Technology Journal

Vol. 39, Part A (2021), No. 4

Niveen Jamal Abdulkader,

Ahmed Ameed, Aveen Yaur

Characterization and mechanical properties of ZA hybrid composites reinforced with nano ceramic particles

15

2020

0.7

IOP Conference Series: Materials Science and Engineering

09/12/2020

Niveen Jamal Abdulkader,

Aseel Mahmood

Mechanical Properties of Polyester Matrix Composites Reinforced with

Waste Marble Particles

16

2020

0.7

IOP Conference Series: Materials Science and Engineering

Niveen Jamal Abdulkader,

Aseel Mahmood

Mechanical Properties of Lightweight Concrete Made with Shredded Waste Polypropylene Yogurt Containers

17

2020

 

Engineering and Technology Journal

Vol. 38, Part A (2020), No. 3

Niveen Jamal Abdulkader,

Mohammed Salab,

Fatima Alaa

Study the Corrosion Behavior of Zinc-Aluminum alloy  Matrix  Composite Reinforced with Nanosilica Produced by Stir Casting.

18

2020

 

 

International Conference of Nanotechnology, 23-24,January,2020

Niveen Jamal Abdulkader,

Hussain Mohammed Yousif

Improving the corrosion resistance of low carbon steel by using nano zinc powder and polyurethane as a binder

19

2020

 

Engineering and Technology Journal

Vol. 38, Part A (2020), No. 1

Niveen Jamal Abdulkader,

Ahmed Ameed, Aveen Yaur

Processing and properties  of  ZA-27 alloy Metal Matrix  Hybrid Composite Reinforced with Nanonitrides

20

2019

 

The 1st conference on modern electrical, mechanical engineering systems and applications

26-27 June 2019, Baghdad-Iraq

Niveen Jamal Abdulkader,

Mohammed Salab,

Fatima Alaa

Fabrication and Mechanical Properties of Zinc Alloy Based Metal Matrix Composites Reinforced with Nano Particles

21

2019

 

Journal of Oil and Gas, 2019

Niveen Jamal Abdulkader,

Hussain Mohammed Yousif

Studying The Effect of Low Temperature on Some Properties of Internal Lining Coating for Steel Liquid Gas Storage Tanks

22

2019

 

ZANCO Journal of Pure and Applied Sciences

The official scientific journal of Salahaddin University-Erbil

https://zancojournals.su.edu.krd/index.php/

JPAS

Published: 09/08 /2019

Niveen Jamal Abdulkader

Ahmed Alghban, Hadeel Ahmed

Study on the Ti-C/nano-ceramic additives reaction due to sintering of elemental powders

23

2019

 

IOP, Journal of Physics:

3/08/2019

Niveen Jamal Abdulkader,

Fadhil Abass,

Kater Alnada Fais

Corrosion Behavior of Zinc Alloy Based Metal Matrix Composites Reinforced with nano BN

24

2018

 

AL-QADISIYAH JOURNAL FOR ENGINEERING SCIENCES

Vol. 11, No. 4 ISSN: 1998-nbz4456, 2018

Niveen Jamal Abdulkader,

Fadhil Abass,

Kater Alnada Fais

Fabrication and Wear Properties of ZA-27 Alloy Matrix Hybrid Composite Composite Reinforced with Nanoparticles

25

2018

 

Engineering and Technology Journal

Vol. 36, Part A. No. 11, 2018

Niveen Jamal Abdulkader

Ahmed Alghban, Hadeel Ahmed

Physical properties study on Ti-C/ Nano-ceramics composite

26

2018

 

IOP, Materials Science and Engineering

13/12/2018

Niveen Jamal Abdulkader

Ahmed Alghban, Hadeel Ahmed

Synthesis

  and stability of Ti-C/nano-ceramics composites

27

2018

 

AIP conference in Lobnan

May 2018

Niveen Jamal Abdulkader,

 

Evaluating of the effect some  mechanical properties for chemically treated various natural fibres reinforced polyester composite.

28

2018

 

Nanotechnology and advanced materials,

2018

Niveen Jamal Abdulkader,

Fadhil Abass,

Kater Alnada Fais

Fabrication and  Corrosion Behavior of Zinc- Aluminum alloy  Metal Matrix  Hybrid Composite Reinforced with Nanoparticles.

29

2018

 

Nanotechnology and advanced materials,

2018

Niveen Jamal Abdulkader

Ahmed Alghban, Hadeel Ahmed

The effect of Al2O3 and CuO nanoparticles on the mechanical properties of Ti-C/ceramic sintered mixture

30

2018

 

The Fourth and First Scientific Engineering Conference on Sustainable Engineering, 2018

Niveen Jamal Abdulkader,

 

 

 

 

Preparation and Corrosion Behavior

of Aluminum Metal Matrix Composites Reinforced with Recycled Materials

 

31

2018

 

Engineering and Technology Journal

Vol. 36, Part A. No. 6, 2018

Niveen Jamal Abdulkader,

Fadhil Abass,

Nibras Jasim

Effect of Nano BN addition on the properties of an aluminum metal matrix composite

 

32

2018

 

IEEE Xplore,

25, January,  2018

Niveen Jamal Abdulkader,

Hussain Mohammed Yousif

Comparison Study Between Hot Dip Galvanizing Steel and Coated Steel Used in Oil Storage Tank and Oil Pipe Transportation

33

2017

 

Fourth Iraq Oil and Gas Conference

Basra 13-14/12/2017

Niveen Jamal Abdulkader,

Hussain Mohammed Yousif

Evaluating The Effect of pipe Outside Coating on The Current of  Cathodic  Protection

34

2017

 

The first scientific conference for postgraduate students’ research and the products and creativity of final year students,24-25/5/2017

Niveen Jamal Abdulkader,

Fadhil Abass,

Nibras Jasim

Studying The Wear Resistance of Recycling Al Alloys Based Metal Matrix Composite Reinforced with Nano SiC

35

2017

 

Nanotechnology and advanced materials in the oil and gas industry,3-4,May,2017

Niveen Jamal Abdulkader,

Hussain Mohammed Yousif

Studying The Effect of Nano Zinc Powder on Protection of Low Carbon Steel Used in Oil Storage Tank

37

2016

 

The Third Feminist Scientific Conference entitled

(Women and science in Iraq),

7-8, Dec.2016

Niveen Jamal Abdulkader,

Payman Suhbat Ahmed,

Saja A.Abdul Maged

Study The Effect of Inhibitor on Aluminium Metal Matrix Composites for Corrosion Resistance

 

38

2016

 

ZANCO Journal of Pure and Applied Sciences

ZJPAS (2016) 28(2); s699-704

Niveen Jamal Abdulkader,

Hussain Mohammed Yousif

Optimization of Corrosion Factors for Locally Manufactured  Fe – Ni Alloy Used in Oil Refining Equipments.

39

2016

 

ZANCO Journal of Pure and Applied Sciences

ZJPAS (2016) 28 (2); s251-255

Niveen Jamal Abdulkader,

Fadhil Abass,

Nibras Jasim

Fabrication of Metal Matrix Composites Reinforced with Nano SiC and Studying their Corrosion Behavior in 3.5% NaCl.

40

2016

 

Sulaimani Journal for Engineering

Sciences

Number : 3 Volume :3

April 2016

Niveen Jamal Abdulkader,

Payman Suhbat Ahmed,

Mohammed Mahdy

Study The Corrosion Behavior of Alumina Particulate/(AA6061) Aluminium Metal Matrix Composite In Marine Environment

41

2016

 

International Conference on Industrial Engineering and Operations Management Kuala Lumpur, Malaysia, March 8-10, 2016

Niveen Jamal Abdulkader,

Hussain Mohammed Yousif

Build Up of Copper EDM Electrode by Using Galvanic Plating Process

42

2016

 

International Conference on Industrial Engineering and Operations Management Kuala Lumpur, Malaysia, March 8-10, 2016

Niveen Jamal Abdulkader,

Hussain Mohammed Yousif

Investigation on Corrosion Behavior of The Al/SiC Nanocomposites in Sea Water

 

43

2015

 

Eng. & Tech. Journal

Vol.33, Part(B)

No. (8), (2015)

Niveen Jamal Abdulkader,

Mohammed Saieed Waheed

The Inhibition of Corrosion for  Metal Matrix Composites  Reinforced with Nano Alumina in  Al –Fao Water By Thiourea

44

2015

 

Eng. & Tech. Journal

Vol.33, Part(B)

No. (4), (2015)

Niveen Jamal Abdulkader,

Mohammed Saieed Waheed

A comparative Corrosion Studies of  Aluminum Metal Matrix Composites Reinforced With nano (Al2O3)P and nano (SiC)P in  Al –Fao Water

45

2015

 

International Conference on Industrial Engineering and Operations Management,

Dubai, United Arab Emirates (UAE),

March 3 – 5, 2015

Niveen Jamal Abdulkader,

Payman Suhbat Ahmed,

Ali Jamal Abdulqader

Optimization of Corrosion Behaviour of Aluminium Metal Matrix Composite reinforced with nanoparticles Using Taguchi’s Techniques

 

46

2015

 

International Conference on Industrial Engineering and Operations Management,

Dubai, United Arab Emirates (UAE),

March 3 – 5, 2015

Niveen Jamal Abdulkader,

Payman Suhbat Ahmed, Manar Nazar Ahmed, Sahar Ismael Baker

Effect of Pure Precipitated Micro Silica on Biological Properties of Mortar

47

2014

 

Eng. & Tech. Journal

Vol.32, Part(A)

No. (10), (2014)

Niveen Jamal Abdulkader,

Payman Suhbat Ahmed,

Saja Amer Abdul Majed

Influence of Acidic and Salt  Media on The Corrosion Behavior of Aluminum Matrix Composites Reinforced by Al2O3 Particles

48

2012

 

International Conference on Industrial Engineering and Operations Management, Istanbul, Turkey,

July 3 – 6, 2012

Niveen Jamal Abdulkader,

Hussain Mohammed Yousif

Study of Electrochemical Polishing  Applications in Some Alloys for High Surface Finish

49

2009

 

Eng. & Tech. Journal

Vol.57, Part(A)

No. (5), (2009)

 

 

Niveen Jamal Abdulkader,

 

Effect of partial heat treatment on the mechanical properties

of high carbon tool steel used in manufacturing active parts in cold work tool steel dies.

50

2007

 

Eng. & Tech. Journal

Vol.25, Part(A)

No. (1), (2007)

Niveen Jamal Abdulkader,

Kahtan Alkazragy,

Alaa Al-Niemi

Effect of Possivity on The Mechanical Machined Surfaces

51

 

بحوث أ.م.د. وليد عاصم حنا

 

No Name of search Single/ Common (names of researchers)  Name of journal IF Year of Publishing Abstract
1 The effect of 5% of ZrO2.Y2O3 on bioactive (Na2O- CaO- SiO2- P2O5) system أ.م.د. صاحب مهدي الصفار مجلة جامعة الملك عبد العزيز/ السعودية المجلد 22، العدد1   2011  

 

   Legal Unit          Committees         Quality Division          Scientific Promotion       contact us

Top