بحوث أ.م.د. ليث قيس عباس
|
No |
Name of research |
Single/ Common (names of researchers) |
Name of journal |
IF |
Year of Publishing |
|
1 |
Mechanical and structural characteristics of ZnO: Cu thin Film |
Ali A. Rageh; Abbas K. Hussein; Laith K. Abbas |
Electromechanical Engineering and its Applications AIP Conf. Proc. 3002, 060013-1–060013-8; https://doi.org/10.1063/5.0209737 Published under an exclusive license by AIP Publishing. 978-0-7354-4939-8/$30.00, AIP Conf. Proc. 3002, 060013 (2024), https://doi.org/10.1063/5.0209737 |
|
2024 |
|
2 |
Improved acrylonitrile-butadiene-styrene surface properties via electroless (NiP-SiC) nanocomposite coating |
Rusul Khalid Alhamad, Abbas Khammas Hussein , Laith Kais Abbas |
Chemical Physics Impact 7 (2023) 100375, Contents lists available at ScienceDirect, Published by Elsevier B.V. |
|
2023 |
|
3 |
Enhanced alumina substrate wear resistance via electroless NiP–TiC nanocomposite coating |
Rusul Khalid Alhamad, Abbas Khammas Hussein , Laith Kais Abbas |
Results in Materials 20 (2023) 100466, contents lists available at ScienceDirect, Published by Elsevier B.V. |
|
2023 |
|
4 |
Synthesis and Characterization of NiP-TiC-SiC Nanocomposite Coating via Electroless Process on Alumina Substrate |
Rusul Kh. Abd, Abbas Kh. Hussei, Laith K. Abbas |
Engineering and Technology Journal 41 (12) |
|
2023 |
|
5 |
Effect of laser energy and substrate temperature on the optical and structural characteristics of ZnO: Cu thin film |
Ali A. Rageh; Abbas K. Hussein; Laith K. Abbas |
”, AIP Conference Proceedings 2830, 030019 (2023), 4th International Scientific Conference of Engineering Sciences and Advances Technologies AIP Conf. Proc. 2830, 030019-1–030019-7; https://doi.org/10.1063/5.0157508; Published by AIP Publishing. 978-0-7354-4585-7/$30.00. |
|
2023 |
|
6 |
A study of cracked nano composite plates under mechanical buckling load |
Zainab K. Younus, Kawther K. Younus, Laith K. Abbas, Abbas K. Hussein |
AIP Conference Proceedings 2830, 070011 (2023), 4th International Scientific Conference of Engineering Sciences and Advances Technologies, AIP Conf. Proc. 2830, 070011-1–070011-9; https://doi.org/10.1063/5.0158072, Published by AIP Publishing. 978-0-7354-4585-7/$30.00.
|
|
2023 |
|
7 |
Improving the Properties of a Polyester-Based Composite Using Nanoparticle Fillers |
Zainab K. Younus, Laith K. Abbas, Abbas Kh. Hussein |
Engineering and Technology Journal, 39 (11) |
|
2021 |
|
8 |
Experimental Study of Cutout Parameters Effect on the Buckling Behavior of Plates |
Zainab K. Younus, Laith K. Abbas, Abbas Kh. Hussein |
Advances in Mechanics, Vol. 9, No. 3 |
|
2021 |
|
9 |
Buckling of Nanocomposite Plates with Cutouts |
Zainab K. Younus, Laith K. Abbas, Abbas Kh. Hussein |
Advances in Mechanics, Vol. 9, No. 3 |
|
2021 |
|
10 |
A Desirability Function for Evaluation of Corrosion Behavior for Nanocoated- Steel Using Electroless Technique |
Muroog M. Shinyar, Abbas Kh. Hussein, Laith K. Abbas |
Engineering and Technology Journal Vol. 39, No. 06 |
|
2021 |
|
11 |
OPTIMIZATION OF MECHANICAL BEHAVIOR OF NI-P NANOCOMPOSITE COATINGS USING TAGUCHI APPROACH |
MUROOG M. SHINYAR, LAITH K. ABBAS, ABBAS KH. HUSSEIN |
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN (P): 2249–6890; ISSN (E): 2249–8001 Vol. 10, Issue 1, Feb 2021, 99–110 © TJPRC Pvt. Ltd |
|
2021 |
|
12 |
OPTIMIZATION OF CORROSION RESISTANCE FOR ELECTROLESS NANOCOATED CARBON STEEL USING TAGUCHI APPROACH |
SAMA Z. ALI, LAITH K. ABBAS, ABBAS K. HUSSEIN |
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN (P): 2249–6890; ISSN (E): 2249–8001 Vol. 11, Issue 3, Jun 2021, 397-404 © TJPRC Pvt. Ltd |
|
2021 |
|
13 |
Optimization of Electroless Ni-P, Ni-Cu-P and Ni-Cu-P-TiO2 Nanocomposite Coatings Microhardness using Taguchi Method |
SAMA Z. ALI, LAITH K. ABBAS, ABBAS K. HUSSEIN |
IOP Conference Series: Materials Science and Engineering, INTCSET 2020 IOP Conf. Series: Materials Science and Engineering 1094 (2020) 012168 IOP Publishing doi:10.1088/1757-899X/1094/1/012168 |
|
2020 |
|
14 |
Multi-Objective Optimization of Friction Stir Welding for Aluminum Alloy (2024-T3) |
Abbas K. Hussein, Laith K. Abbas, Ahmed A. Seger |
Engineering and Technology Journal, Vol. 38, Part A, No.02 |
|
2020 |
|
15 |
DESIRABILITY OPTIMIZATION OF MECHANICAL BEHAVIOR FOR FRICTION STIR WELDED ALUMINIUM ALLOY (AA2024-T3) |
ABBAS KH. HUSSEIN, LAITH K. ABBAS, AHMED A. SEGER |
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN (P): 2249–6890; ISSN (E): 2249–8001 Vol. 9, Issue 5, Oct, 1111–1128 © TJPRC Pvt. Ltd |
|
2019 |
|
16 |
Effect of Quenching Media Variations on the Mechanical Behavior of Martensitic Stainless Steel |
Abbas Kh. Hussein, Laith K. Abbas, Wisam N. Hasan |
Al-Khwarizmi Engineering Journal, Vol. 15, No. 2, June |
|
2019 |
|
17 |
Abbas KH. Hussein, Laith K. Abbas, Wisam N. Hasan |
Kufa Journal of Engineering, Volume 10, Issue 1 |
|
2019 |
|
|
18 |
Optimization of Heat Treatment Parameters for the Tensile Properties of Medium Carbon Steel |
Abbas KH. Hussein, Laith K. Abbas, Wisam N. Hasan |
Engineering and Technology Journal, Volume 36, Issue 10, Part (A) |
|
2019 |
|
19 |
Multiple Performance Optimization of Carburized Steel Using Taguchi Based Moora Approach |
Abbas KH. Hussein, Laith K. Abbas, Asraa K. Hameed |
Engineering and Technology Journal, Volume 36, Issue 7, Part (A) |
|
2018 |
|
20 |
Investigation corrosion and mechanical properties of carburized low carbon steel |
Abbas KH. Hussein, Laith K. Abbas, Asraa K. Hameed |
Journal of Engineering and Sustainable Development, Volume 22, Issue 02, Part-6 |
|
2018 |
|
21 |
Effect of Carburization Parameters on Hardness of Carburized Steel Using MOORA Approach |
Abbas KH. Hussein, Laith K. Abbas, Asraa K. Hameed |
Al-Khwarizmi Engineering Journal, Volume 14, Issue 3 |
|
2018 |
|
22 |
Study the Characterizations of Cement Mortar by Nano Pozzolanic Materials Additions |
Fadhil A. Rasin, Laith K. Abbas, Mohammed J. Kadhim |
Al-Khwarizmi Engineering Journal, Volume 13, Issue 4 |
|
2017 |
|
23 |
Study the Effects of Nano-Materials Addition on Some Mechanical Properties of Cement Mortar |
Fadhil A. Rasin, Laith K. Abbas, Mohammed J. Kadhim |
Engineering and Technology Journal, Volume 35, Issue Part A |
|
2017 |
|
24 |
Study the effect of nano materials addition on some properties of cement mortar |
Fadhil A. Rasin, Laith K. Abbas, Mohammed J. Kadhim |
Journal of Engineering and Sustainable Development, Volume 21, Issue 5 |
|
2017 |
|
25 |
Antibacterial Activity of Electrospun Silver Nitrate /Nylon 6 Polymeric Nanofiber Water Filtration Mats |
Akram R. Jabur, Laith K. Abbas, Saja A. Moosa |
Al-Khwarizmi Engineering Journal, Vol. 13, No. 1 |
|
2017 |
|
26 |
MULTIPLE OBJECTIVE OPTIMIZATION OF WELD GEOMETRY OF DISSIMILAR METALS |
Assist. Prof. Dr. Abbas KH. Hussein, Assist. Prof. Dr. Laith K. Abbas, Dr. Jamal J. Dawood |
The Iraqi Journal for Mechanical and Material Engineering, Vol. 16, No. 4 |
|
2016 |
|
27 |
Fabrication of Electrospun Chitosan/Nylon 6 Nanofibrous Membrane toward Metal Ions Removal and Antibacterial Effect |
Assist. Prof. Dr. Akram R. Jabur, Assist. Prof. Dr. Laith K. Abbas, Saja A. Moosa |
Hindawi Publishing Corporation, Advances in Materials Science and Engineering, Volume 2016, Article ID 5810216, 10 pages, http://dx.doi.org/10.1155/2016/5810216 |
|
2016 |
|
28 |
Modeling of Carburization Parameters Process for Low Carbon Steel |
Assist. Prof. Dr. Abbas KH. Hussein, Assist. Prof. Dr. Laith K. Abbas, Dr. Jamal J. Dawood, Nadeen Jaafar Ismae |
Eng. & Tech. Journal, Vol. 34, Part (A), No.6 |
|
2016 |
|
29 |
Ambient Temperature Affect the Pore size of PVA Nanofibers Tissues |
Assist. Prof. Dr. Akram R. Jabur, Assist. Prof. Dr. Laith K. Abbas, Safa M. Muhi Aldain |
The 5th International scientific Conference on Nanotechnology & Advanced Materials Their Applications (ICNAMA 2015) 3-4 Nov, Eng. &Tech. Journal, Vol.33, Part (B), No.6 |
|
2015 |
|
30 |
The effect of operating parameter on the morphology of electrospun poly vinyl alcohol nanofibers |
Assist. Prof. Dr. Akram R. Jabur, Assist. Prof. Dr. Laith K. Abbas, Safa M. Muhi Aldain |
The international 3rd. Scientific Conference of The College of Science, JOURNAL OF UNIVERSITY OF KERBALA, An Academic Journal Adopted for Scientific Promotions Issued by, University of Karbala |
|
2015 |
|
31 |
Finite Element Analysis Using MATLAB of Oxidation Kinetics in Air of Steel-T21 Alloy Coated by Simultaneous Germanium-Doped Aluminizing-Siliconizing Process |
Assist. Prof. Dr. Abbas KH. Hussein, Assist. Prof. Dr. Laith K. Abbas, Assist. Prof. Dr. Emad S. Al-Hasany |
International J. of Eng. Research & Indu. Appls. (IJERIA). ISSN 0974-1518, Vol.6, No. II |
|
2013 |
|
32 |
Study of the effect of acetone dilution percentage on mechanical properties of epoxy - acetone system |
Dr. Laith Kais Abbas AL-Haidary |
The Iraqi journal of mechanical and materials engineering, Vol.11, No.2 |
|
2011 |
|
33 |
Study of Polymer Quenchants Effect on Some Properties of low alloy steel type (St37) |
Assist. Prof. Dr. Waleed A. Hana, Dr. Laith K. Abbas, Manar .A. Najim |
Engineering & technology journal, Vol.28, No.5 |
|
2010 |
|
34 |
Study of Polymer Quenchants Effect on Some Properties of alloyed tool steel (X155) |
Assist. Prof. Dr. Waleed A. Hana, Dr. Laith K. Abbas, Manar .A. Najim |
Engineering & technology journal, Vol.28, No.4 |
|
2010 |
|
35 |
Study of Polymer Quenchants Effect on Some Properties of Stainless Steel alloy (316L) |
Assist. Prof. Dr. Waleed A. Hana, Dr. Laith K. Abbas, Manar. A. Najim, |
Engineering & technology journal, Vol.27, No.10 |
|
2009 |
|
36 |
Preliminary design to find the average diameter of a steam turbine stages |
Prof. Dr. Assim H. Y. Al-Darajy, Dr. Laith K. Abbas. Al-Haidary |
Journal of engineering, No.4, Vol.10, December |
|
2003 |
|
37 |
Preliminary design for first stage of supercritical pressure steam turbine |
Prof. Dr. Assim H. Y. Al-Darajy, Dr. Laith K. Abbas. Al-Haidary |
Baghdad fifth scientific conference / College of engineering – mechanical engineering fourth axis |
|
2003 |
