عضو ارتباط
The Department of Materials Engineering at the University of Technology awarded a master’s degree to the student Sarmad Sharq Nuri, Department of Materials Engineering/ University of Technology, for his thesis titled:
"Recycling of Local industries Waste to Produce Corrosion Inhibitors for Mild Steel in Different Corrosive Media"
Where the discussion took place in the Graduate Studies Hall in Building C in the department on Tuesday, 4/26/2021 at nine in the morning, and the discussion committee consisted of the following:
1. Prof. Abbas Khammas Hussein, President
2. Asst .prof .Dr.. Nahed Mahmoud Ali as Member
3. Lect.Dr. Ahmed Muzaffar Hashem, as a Member
4. Asst .prof .Dr. Fadel Abbas Hashem, as a supervising Member
5. Asst .prof .Dr.. Nevin Gamal Abdel Qader as a supervising Member
As well as evaluating the message scientifically by Prof.Dr. Ali Hobi Halim/ Babylon University/ College of Materials Engineering, andAsst. Prof. Dr. Khaled Hamed Rashid/ University of Technology/ Department of Chemical Engineering, and linguistically by Asst. Prof.Dr Laith Waddah Ismail/ University of Technology/ Materials Engineering Department.
After the Members of The Discussion committee recorded their observations on the thesis, which were divided between explanation and correction and the student’s defense of his message and the end of the discussion, the committee decided to evaluate the thesis, and decided to grant the student a master’s degree with a Pass grade.
Abstract:
This work aims to examine two types of local industrial waste (sodium silicate and styrene-butadiene) with different concentrations to be utilized as corrosion inhibitors for mild steel in a 3.5% NaCl solution. The corrosion rates obtained from polarization measurements showed good inhibition efficiency, and the optimum concentration of sodium silicate at 3 ml with an inhibition efficiency of 84.5%, and for styrene-butadiene at 4 ml with an inhibition efficiency of 98.5%. The surface analysis by FTIR, FESEM, and XRD showed that these inhibitors contain many functional groups act as corrosion inhibitors, and the absorption and presence of inhibitor particles on the metal surface was also confirmed, forming a smooth protective layer that protects the metal.
The Department of Materials Engineering at the University of Technology awarded a doctorate degree to the student Saja Aqil Musa, Department of Materials Engineering/ University of Technology, for her thesis titled:
"Preparation and characterization of drug delivery biomaterials system"
the Disscussion took place in the Graduate Studies Hall in Building C in the department on Tuesday 19/4/1921 at nine in the morning, and the discussion committee consisted of following ladies and Gentlemen:
1. Prof. Dr. Saad Badri Hasson Farid , as Chairman
2. Asst .Prof.Dr.. Ali Hussein Alwanas as a Member
3.Prof.Dr. Kazem Matar Shabib, as a Member
4. Prof.Dr. Auoda Jabbar Brihi is back as a member
5. Asst.Prof.Dr. Nevin Gamal Abdel Qader is a member
6. Prof.Dr. Akram Rahim Jabr is an honorable member
7. Prof. Dr. Emad Saadi Abdel Karim is an honorable member
8. Assst.prof .Dr. Ahmed Majid Al-Shamry is an honorable member
As well as evaluating the message scientifically by Prof.Dr. Kazem Kamel Rasan/Al-Mustansiriya University/College of Engineering/Department of Materials Engineering, and Asst. Masaar Najm Obaid / University of Babylon / College of Materials Engineering, and linguistically by Asst Prof. Zainab Naef Rashid/ University of Technology/ Department of Applied Sciences.
After the Members of discussion committee recorded Their observations on the thesis, which were divided between explanation and correction and the student’s defense of her thesis and the discussion ended, the committee decided to evaluate the thesis, and decided to grant the student a doctorate degree with a Pass grade.
The Department of Materials Engineering at the University of Technology awarded a doctorate degree to the student Esraa Faisal Ghazi, Department of Materials Engineering/ University of Technology, for her tagged thesis
"Fabrication and Characterization of Polymeric Hybrid Composite Materials for Biomedical Application"
Where the discussion took place in the Graduate Studies Hall in Building C in the department on Thursday, 4/7/2021 at nine in the morning, and the discussion committee consisted of Following Ladies and Gentlemen:
1. Prof. Wafaa Mahdi Saleh as President
2. Prof. Bashar Awaid Badawi, as a member
3. Prof. Ahmed Fadel Hamza as aMember
4. Asst.Prof.Dr. Khaled Khudair Abbas as a Member
5. Asst.Prof.Dr. Alia Hussein Abdel Salam as a Member
6. Asst.Prof.Dr. Jawad Kazem Aliwi as a Supervising member
7. Prof.Dr. Sihama Issa Saleh as a Supervising member
8. Prof.Dr Muhammad Ali Matarias a Supervising member
As well as a scientific evaluation of the thesis by a Assisitant professor. Dr. Ghanem Shaker Sadiq/Al-Nahrain University/College of Engineering/Mechanical Engineering Department, and Asst. Prof.Dr. Sadir Muwaffaq Majeed/ University of Technology/ Department of Applied Sciences, and linguistically by Asst. Prof. Laith Waddah Ismail/ University of Technology/ Materials Engineering Department.
Abstract:
316L stainless steel alloys are widely employed in the biomedical application for replacement defect bones for old and young .This study aims to improve the coating layer by applying pulsed electrophoretic deposition PEFD technique by depositing a coating layer from chitosan and hydroxyapatite. The characterization of the layer was done using scanning electron microscope spectroscopy Infrared spectroscope, contact angle and adhesion strength. The results showed that a homogeneous coating layer free of cracks and bubbles was obtained under a deposition time 10 minutes , frequency 50 Hz and a concentration of hydroxyapatite 0.6 g /100 ml with a layer of coating resistant to E- coli bacteria.
The Department of Materials Engineering at the University of Technology awarded a master’s degree to the student Israa Zuhair Ahmed, Department of Materials Engineering/ University of Technology, for her thesis Titled .
"Electrodepositing and characterization of polymer composite coating"
The discussion took place in the Graduate Studies Hall in Building C in the department on Tuesday, 18/2022 at nine in the morning, and the discussion committee consisted of Ladies and Gentlemen :
1. Prof. Rana Afif Majeed, as Chairman
2. Prof. Adel Khalil Mahmoud as a member
3. Asst Prof .Dr . Khaled Khudair Abbas as a Member
4. Asst Prof .Dr . Hussein Alaa Jaber as a Supervisor
5. Lect.Dr. Shaima Mahdi Saleh as a Supervisor
As well as evaluating the Thesis scientifically by Prof. Khaled Murshid Owaid/Al-Mustansiriya University/College of Engineering/Department of Materials Engineering, and Prof.Dr. Amjad Saleh Mahmoud/ Samarra University/ College of Engineering, and linguistically by Prof. Yasser Mawla Mahmoud/Al-Mustansiriya University/College of Engineering.
After the discussion committee recorded its observations on the thesis, which were on explanation and correction and the student’s defense of her message and the discussion ended, the committee decided to accept the thesis, and decided to grant the student a master’s degree with a Pass grade.
