MSc. Dissertation discussion

On 28 / 6 / 2015 a discussion of MSc. Dissertation entitled " Preparation and characterization of bio-memory alloy form the basis of which cobalt" submitted by the student Zinaa A. Salman took place in postgraduate studies hall of materials engineering department .
The committee of discussion consisted of the following lecturers :
1. Assist. Pro. Dr. Fadhel A. Hashim , materials engineering department / university of technology , head of the committee
2. Assist. Pro. Dr. Ahmed M. Muhsin ,engineering department / university of technology , member
3. Assist. Pro. Dr. Haider H. Jaber ,materials engineering college / university of Babylon , member
4. Assist. Pro. Dr. Emad S. Abdulkareem , materials engineering department / university of technology , supervisor
At the end of the discussion the student has been awarded a very good degree.

Postgraduate Student Seminar / About Expedition Research

On 25/06/2015 a seminar presented by the PhD. Student "Sura A. Muhsin about her expedition research to Missouri state university  was held in postgraduate studies hall of the   materials engineering department and chaired by Dr. Saad B. H.  Farid and department reporter Dalia M.Jomah.  and attended by a group of our academic staff and a group of postgraduate students at 9:30 A.M.

The student discussed the method of preparation and characterization of the specimens that the doctoral research " Investigation The Behavior Of Metallic Matrix Composite Material As Bio-Implant" concerned with.

She also discussed the preparation of titanium metal specimens  and hydroxyapatite  for biological uses through utilizing developed devices and novel techniques.

Assignment

On 16/06/2015  Assist. Pro. Dr. Alaa  A. Atiyah the head of materials engineering department instructed his administrative assistant Assist .Pro .Dr. Laith K. Abbas to attend the ceremony of signing a memorandum about scientific cooperation between Nanotechnology and advanced materials research center / university of technology and midland refineries company / ministry of oil .the signing of the memorandum was done by both  Pro. Dr. Ameen D. Thamer the president of the university of technology and the manager of midland refineries company /ministry of oil. a group of heads of departments and academic staff of university of technology  has attended the ceremony as well.

Deputation

According to the ministerial order  of ministry of higher education and scientific research / research and development department numbered 1955 on 02/06/2015 , two members of materials engineering department  that were  Assist. Pro .Dr. Ahmed M. Hassan and Assist. Pro .Dr. Alaa A. Abdel - Hamead ,have been deputized  for one day that matched 2 / 6 / 2015 to university of Babylon / engineering college as a committee to accomplish a field visit  and to oversee the material and human potentials  of the college to discuss establishment of doctoral studies in polymers and  composites branch  / non metallic materials  department /materials engineering college / university of Babylon.

Academic Staff Activities

a member of our academic staff, Assist. Pro. Dr. Abbas K. Husain, has participated as a member of a discussion committee for the Msc. dissertation entitled  

" Effect of Nano-Fluid Variables as Quenchant on Mechanical Properties of DINCK45 Used  in Manufacturing of Dies."

presented by postgraduate student ,Mohammed A. Fadhil  specialized in the engineering of moulds techniques / technical  engineering college .

the discussion took place in the hall of postgraduate studies in the technical engineering college

Financial Grant

on  15/06/2015 , with  the attendance of    Assist. Pro. Dr. Alaa  A. Atiyah the head of materials engineering department ,   the financial grant has been delivered to the undergraduate and postgraduate students (MSc. and PhD.) that amount to 300,0000 dinars for the months (December, January and February ) .the number of undergraduate  students that have been delivered was 164 while the number of postgraduate students was 11.

Visit of The President of The University of Technology

on 13/06/2015 Pro. Dr. Ameen D. Thamer the president of the university of technology accompanied by his both scientific and administrative assistants has visited  the materials engineering department to oversee the proceeding of final examinations and was received by  Assis. Pro. Dr. Alaa  A. Atyaa  the head of the department. The president inquired the students about the nature of the questions and wished them success.

The Meeting of The Head of The Materials Engineering Department with The Employees of The Department

on 08/06/2015  Assis. Pro. Dr. Alaa A. Atiyah  the head of the materials engineering department has met the employees of the department in council department hall with the attendance of his administrative assistant .he appreciated the efforts done by them that made the department to be the second best of all the departments of the university of technology concerning administrative aspects. he also appreciated the administrative achievements done by administrative staff ,engineers and technicians and he considered them to be the proper tool to carry out the administrative strategy  of the department by precision and speed in accomplishing work assigned to them. he also discussed the pattern of the rules of organized behavior between employees in state sectors. he also listened to the opinions and suggestions of the employees that  could develop the sections of the department especially those with direct connection with the citizens like certificates and registration  sections. on the end of the meeting the head of the department appreciated the well  performance done by the employees and motivated them to continue perseverance that develop  administrative process according to the essentials of public interest.

The President of University of Technology Oversee the Proceedings of Final Examinations

on 30/05/2015  Pro. Dr. Ameen D. Thamer the president of University of Technology visited the Materials Engineering Department to oversee the proceedings of final examinations for the year 2014/2015, he listened to a detailed demonstration by Ass. Pro. Dr . Alaa A. Atiyah  the head of Materials Engineering Department about the essential steps that adopted by the department to make the examination succeeded including accommodation of examination halls and providing all convenient conditions for the students. The president of university of technology also inquired  students  about the nature of  the questions and wished them success.

Final Examinations

on 26/05/2015 the final examinations of undergraduate students of materials engineering department started. Ass. Pro. Dr. Alaa A. Atiyah accompanied by both scientific and administrative assistants took a tour around and inside examination halls, he also oversaw the examinations proceedings and the nature of the questions, he also wished success to all students. The number of students that participated in examinations were 240.

General Authority Meeting

          Pro. Dr . Ameen D. Thamer the president of UOT assured during the General Authority Meeting of Materials Engineering Department held on 25/05/2015 with the attendance of Ass. Pro. Dr. Alaa A. Atiyah the head of the department, scientific and administrative assistant and academic staff that the obtaining advanced position internationally by university of technology was the results of concerted efforts done by its staff including professors, researchers and employees to transcend scientific aspects that made us proud, he also recommended promoting electronic web sites of the departments of the university by continuous uploading of published scientific researches, discriminative projects and examination results because these promoted web sites could be a good reflection of all activities and achievements of the university.
         He also elucidated that the outcomes of universities can be evaluated by convenient preparations for final examinations and providing good conditions and all success requirements for our students the head of the materials engineering department appreciated the continuous support and wise instructions of the president of university of technology to develop and activate the materials engineering department to serve society
        The head of the department mentioned that listening to the opinions of the staff and taking into consideration the suggestions that expose the activities of department took priority especially that the department had been evaluated as being the topmost concerning scientific and administrative aspects and this reflected discriminative performance of the department, he also recommended enhancing efforts to make use of all positives and achieved targets ,he also recommended accomplishing all preparations for final examinations and providing essential requirements to make examinations proceedings succeeded at the end of the general authority meeting, the head of the materials engineering department appreciated the efforts and special performance done by academic staff during the semesters of 2014/2015 and wished them success.

Scientific conference

On 20/05/2015 a group of our academic staff(Assis. Pro. Dr. Jawad K. Oleiwi , Assis. Pro. Dr. Sohama E. Saleh and Dr . Qahtan A. Hamad) participated with their scientific research " Tensile study and examination of the microscopic structure of the polycarbonate resin properties unparalleled Metha Akrliat self-processor kit full of artificial teeth " in the international scientific conference held in the college of materials engineering / Babylon university under slogan "materials engineering is the fundamental of scientific and industrial development. Dr . Qahtan A. Hamad demonstrated the research.

Appreciation

on  18/05/2015  a group of our academic staff had been delivered a certificate of appreciation by the president of university of technology Pro. Dr. Ameen D.Thamer for special efforts done by them in publishing scientific researches according to the protocol of our university. the group listed below:

1.      Pro. Dr. Fadhil A. Chyad

2.      Assis. Pro. Dr.Abbas K. Husain

3.      Assis. Pro. Dr. Ahmed M.H. Abdulkadhim Al-Ghaban

4.      Assis. Pro. Dr. Jawad K. Oleiwi

5.      Assis. Pro. Dr.  Sohama E. Saleh

6.      Assis. Pro. Dr. Saad B. H. Farid

7.      Assis. Pro. Dr. Rana A. Majed

8.      Assis. Pro. Dr. Akram R. Jabr

Originality Versus Innovation in Scientific Research

On  29/04/2015 a lecture of title" Originality Versus Innovation in Scientific Research"  was attended by the   head of materials engineering department  , scientific assistant and some other academic staff and was presented by Ass. Lec. Dr. Saad B. H. Fareed .

That lecture discussed the difference between originality , innovation ,patent , novelty and building  both scientific capabilities and scientific research. That lecture included questionnaire focused on  the main targets of projects of undergraduate students and thesis of PhD. And MSc. Degrees.

The results of that questionnaire reflected positive impression with items discussed in that lecture. Those results sent to the head of materials engineering department with a suggestion to be a part of scientific assistant documents

 Lectures

On 28/04/2015 a lecture about "prospects of cooperation between university of technology and petroleum establishments and institutes"  ,attended by a number of our academic staff, was presented by Lec. Dr. Muhammad A. Muhammad.

That lecture  discussed  prospects and evaluation of cooperation plan with ministry of petroleum and petroleum refineries company .also discussed the possibility of consolidating academic role of materials engineering department /university of technology through offering proposals that contribute in developing  Iraqi petroleum industries.

Appreciation for Dedication

On 27/04/2015 Ass. Pro. Dr. Abbass  K. hussain the head of general materials engineering department had been appreciated by the minster of high education and scientific research for the dedication of his book "design of engineering materials "to his Excellency.

Rewarding

On 28/04/2015 the head of materials engineering department  Ass. Pro . Dr . Alaa A. Atiyah met a number of academic and employees staff  of women and  rewarded some of them with a memorial gifts  for having PhD degree and some for being hard working employees  . on behalf of staff  Ass. Pro .Dr . Suhamma A .Salih had given the head a memorial gift  out of appreciation for his  continuous support.

Research Publishing  

a research had been published in engineering and technology journal of title "  Carbonation of Steel in Reinforced Concrete in different waters  "

by Lec .Hind B. Ali , Ass . L ec. Shatha A .Ryadh and Ass .L ec. Ali A . Muhsin

lecture

On 27/04/2015 a lecture about publishing in Scientific Journals with Impact Factor (IF ) presented by Ass. Pro. Dr. Ahmed A. Hussain from Applied Science Department / University Of Technology with the attendance of  Ass. Pro. Dr . Farhad M. Othman  the Scientific Assistant  and some other  Academic Staff.

Corrosion in Aircrafts Industry

Assist. Pro. Dr. Alaa A. Atiyah the head of materials engineering department had published a book by lambert academic publishing house.

The title of the book is "corrosion in aircrafts industry" the book consists of four chapters discussing fundamentals of corrosion and its kinds and mechanical properties of aircrafts. It also contains demonstration of main parts of aircrafts and materials used in manufacturing them.

Reward

On 22 / 4 / 2015 Dr. Alaa A. Atiyah the head of materials engineering department rewarded Dr .Salih AL –Garaawi the head of computer engineering department / university of technology within the meeting of council chamber of department with the attendance of Ass.Pro. Dr . Farhad M .Athman the scientific assistant , Ass.Pro.Dr . Laith Q. Abbas the administrative assistant and heads of branches of materials engineering department

Participation in Symposium

On 12/04/2015 a number of our academic staff participated in symposium that held in materials engineering department / Al-Mustansirya University of title "Biological Materials and its Engineering Applications" This symposium was chaired by Dr. Fadhel A. Chyad.

Ending The Fourth Cultural Season

On 16/04 /2015 the fourth cultural season ended with holding a scientific lecture of title "Academic Accreditation and its Standards" presented by Dr . Husain A. Jabbar  with  the attendance of  Ass. Pro. Dr. Farhad M. Othman the scientific assistant  and Ass. Pro.  Dr. Laith Q. Abbas the administrative assistant and some other academic staff.

A scientific competition between students of fourth and third grades of all branches had been held included various questions. The Ceramic and Building Materials won this competition.

At the end of all activities of the fourth cultural season Ass.Pro. Dr. Alaa A. Atiyah the head of materials engineering department delivered   a certificates of appreciation to all members of preparatory committee and the students participated in the scientific competition.

Continues of The Fourth Cultural Season

On 15 /4 /2015 the fourth day of cultural season started with inauguration of an exhibition by the president of university of technology Pro. Dr. Ameen D. Thamer and his scientific assistant Dr. Wissam K. Hamdan and a number of heads of other departments of the University of Technology. Ass. Pro. Dr. Alaa A. Atiyah the head of materials engineering  department received them delightfully .

This exhibition included demonstration of special graduate projects, PhD. and MSc. thesis discussed in 2015 and some posters done by students showed mechanical and engineering  drawing and some  activities.

The president of university also reopened strength of materials laboratory after restoration and providing with new equipments .he appreciated efforts done by the staff to develop laboratories and hence serving students and researchers.

Continues of The Fourth Cultural Season

On 14 / 4 /2015 the third day of cultural season started with holding a seminar presented by  PhD students and attended by the head of materials engineering department and some other academic staff. students demonstrated their results . this seminar chaired  by Ass.Pro. Dr.Laith Q.Abbass the administrative assistant.

Continues of The Fourth Cultural Season

On the  13/04/2015 the second day of culture season started with holding an exhibition of scientific outputs of materials engineering department .this exhibition was visited by mayor of Baghdad Mr. Ali Al-Timimi and acting minister of higher education and scientific research and some other dignitaries. They listened to a detailed demonstration about these outputs.

The delegate of ministry of oil, the engineer Mrs. Zakia A. Yousif also visited our exhibition and showed interest in gas detection compound that has a deep connection with gases of refineries and light weight fire brick compound that could be used in furnace used for separation of oil products. The delegate invited our academic staff to participate in Iraq third conference for oil and gas.

Rewarding

On 12 /4 2015,the head of materials engineering department Ass. Pro. Dr.  Alaa A. Atiyah and Ass. Pro.  Dr. Farhad M. Authman the scientific assistant received a number of students that won cultural contest held in control and systems department on occasion of 40 anniversary of university of technology. The head appreciated efforts done by the winner students and wished them success in all aspects.

The Fourth Cultural Season

Under custody of the president of university of technology Prof. Dr. Ameen Dawi Thamer, materials engineering department held its fourth cultural season on 12-16/04/ 2015 under motto "with our army and our alhashed alshaaby, Iraq will be more strong and progress".

First day of this season included seminar about:

1.             Computers application in materials engineering presented by Assist. Prof. Dr. Abbas Khamas the head of general materials engineering branch

2.             Welding in the Bullion presented by Assist. Prof. Dr. Fadhel Abbas

The seminar was chaired by Assist. Prof. Dr. Laith Q. Abbas the administrative assistant and Assist. Prof. Dr. Ahmed Al-Gaban the head of ceramic and building materials branch with the attendance of some academic staff and researchers

MSc. Dissertation Discussion

On 03/03/2016, Assit. Prof. Dr. Farhad Mohammad Othman a Scientific Assistant in the Department of Materials Engineering participated in MSc. Dissertation Discussion at College of Materials\ Babylon University which entitled “Advance electroless deposition against corrosion" for student Intesar Satar Jabori.

PhD. Dissertation Discussion

On 02/03/2016, Prof. Dr. Fadhil Attya Jiyad  a lecturere in the Department of Materials Engineering participated in PhD. Dissertation Discussion at College of Sceince \ Al-Nahrain University which entitled “Surface Development of Titanium and its Alloys in a Way Paint Nano-Plasma” for student Dina Adb Al-Sahib Hashim.

Awards

On 10/03/2016 lec. Mervat Mehdi Hanoos and Anaam Jassim Mohammed and the student Alaa Shaker from Department of Materials Engineering have awarded in the celebrate about the International Women's Day in the University of Technology, this celebrate under the auspices of Prof. Dr. Amin Douai Thamer the president of University under the slogan "Iraqi women are a symbol of sacrifice and tender".

PhD. Dissertation Discussion

On 10/03/2016,  Ph.D. Dissertation has been discussed entitled " Studying the Effect of Nano Additives Materials in Cement Coating for Building Applications" submitted by the Asst. Prof. Sarmad Imad  which took place in postgraduate studies hall at Materials engineering department. The committee awarded the student an excellent degree.

Patent

The Asst. Prof. Dr. Jawad Kadhim Oleiwi and Asst. Prof. Dr. Mohammad Salab Hamza got a patent about a new plan to develop the performance of Embossing frame to add mini ceramic powders from Ministry of Planning / The Central Organization of Standardization and Quality Control. Patent No. 4457

Awards

On 21/02/2016 awards Asst. Prof. Dr. Jawad Kadhim Oleiwi the Head of Department of Materials Engineering / agency a group of students of the department about there participating in the art fair, which was held on the opening the new building for Department. The names of the awards students: Mariam Taha Yassin, Safe Akram Salem, Noor Al-Huda Mohammed Ali Nawar and Marwa Abdel Abbas.

The First Course Exams

On 02/21/2016 the Final Exams for the First Course / First Classroom began in the Department of Materials Engineering, where inspected Prof. Dr. Jawad Kadhim Oleiwi the Head of the Department of Materials Engineering / agency and the Scientific Assistant and Administration Assistant the examination procedures for our students wishing success

The President of The University of Technology Opened a New Building for Department of Materials Engineering

On 12/01/2016, Prof. Dr. Amin Douai Thamer (President of The University of Technology) opened a new building for Department of Materials Eng. in the presence of Assistant Prof. Dr. Jawad Kadhim Oleiwi (The head of department), Assistant Prof. Dr. Alaa Abdulhasan Atiyah (UOT Vice President for Scientific Affairs) and some academic staffs from the same department. This building contains halls for lectures, laboratories and rooms for academic staff.

Participation

A group of teachers of the Department of Materials Engineering (Mirvat Mehdi Hnoos, Mina Faisal Khudair, Sahar Hussein Ahmed) Subscribe in the civil defense course which were held in the General Directorate of Civil Defense for two weeks from the date of 20/12/2015.

PhD. Dissertation Discussion

On 22/12/2015,  Ph.D. Dissertation has been discussed entitled "Improvement the performance of artificial foot by blended polymeric reinforced by different systems" submitted by the Eng. Ahmed Neama which took place in postgraduate studies hall at Materials engineering department. The committee awarded the student an excellent degree.

Committee

On 21/12/2015, Assistant Prof. Dr. Akram R. Jabur and Assistant Prof. Dr. Ahmed M. Hasan participated in a completed committee to discuss the suggested projects for Ph.D. at Applied Physics Branch in Department of Applied Science.

Patent

The engineers Mohamed Ali Tariq and Ban Abulalaah got a patent about manufacturing of an instrument to measure erosion of materials from Ministry of Planning / The Central Organization of Standardization and Quality Control. Patent No. 4319

PhD. Dissertation Discussion

On 22/12/2015, Ph. D. Dissertation has been discussed entitled "Compton Scattering Imaging For Measuring Corrosion and Cracks" submitted by the Assistant Lec. Sura Salim Ahmed which took place  in Al-Mustansiriyah University – College of Science. The committee awarded the student an excellent degree.

Meeting

On 10/01/2016, Assist. Prof. Dr. Saad B. H. Farid & Assist. Lec. Shatha R. A. Ezat attended a meeting at Ministry of Planning / The Central Organization of Standardization and Quality Control about Update the Iraqi Standard No.1911  that specifications for Sanitary Ware Glazed and it's the second participation in Iraqi specification is complementary collaboration with the Department of Materials Engineering

An Upgrade

Upgrade has been lecturer in the Department of Materials Engineering Dr. Bassam Khalil Ibrahem from the rank Teacher to Assistant Professor by the university' No.958 in 30/12/2015.

Scientific Lectures Extra

On 05/01/2016 Department of Materials Engineering Started within the Scientific Approaches to raise the Scientific level of our students includes work extra lectures for students of the first classroom included the following:
1- Engineering Mechanics.
2- Principles of Engineering Materials
It has been lecturing by Assistant Prof. Dr. Abass Khamas Hussin and Majid Hamid Abdul Majid and Suhar Hussein Ahmed and Hiba Anwar Abdullah

M.Sc Dissertation Discussion

On 31/12/2015, Assistant Prof. Dr. Abass Khamas Hussin ‘Head of General Materials Engineering Branch / Department of Materials Eng.’ participated in M.Sc. Dissertation discussion at Middle Technical University which entitled “Effect of particulate additives to deep drawing dies lubricants in forming aluminum sheets” for student Monaf hashim Reda.

Participating on Giving Lectures for Dentistry College’s students (Ph.D. stage) – University of Baghdad

Numerous of academic staff at Department of Materials Eng. (Assi. Prof. Dr. Jawad K. Oleiwi, Assi. Prof. Dr. Sohama E. Saleh, Assi. Prof. Dr. Saad B. H. Farid, Assi. Prof. Dr. Fadhil A. Hashim and Assi. Prof. Dr. Ahmed M.H. Al-Ghaban) are participating on giving lectures for Dentistry College’s students (Ph.D. stage) – University of Baghdad (the first course) 2015-2016. These lectures concerned to biomaterials including metallic, ceramic and polymeric materials and their properties in addition to special physics of these materials.

PhD. Dissertation

                        The dissertation was linguistically reviewed by Prof. Dr. Arkan Khalkhal and scientifically by Assistant Prof. Dr. Kadhem K. Resen

The committee of discussion consisted of the following lecturers:

1-  Prof. Dr. Amin Daway Thamir, President of the University of Technology, Head of the committee.

2- Prof.  Dr.  Ali H. Ataiwi, Al-Kufa University- college of engineering,  Member.

3- Assistant Prof. Dr. Adnan N. Abud, Technical College - Baghdad, Member.

4- Assistant Prof. Dr. Emad S. Abdulkareem, Materials Eng.-University of Technology, Member.

5- Assistant Prof. Dr.  Rana A. Majed, Materials Eng.-University of Technology, Member.

6- Assistant Prof. Dr. Fadhel A. Hashim, Materials Eng.-University of Technology, Supervisor.

7- Assistant Prof. Dr. Saad B. H. Farid, Materials Eng.-University of Technology Supervisor.

The committee awarded the student a very good degree.

M.Sc. Dissertation

                        The dissertation was linguistically reviewed by Prof. Dr. Samer Amen and scientifically by Assistant Prof. Abdulrahman Kadhem.

The committee of discussion consisted of the following lecturers:
1- Prof.  Alaa K. Mohammed, Al-Khawarizimi College-University of Baghdad, Head of the committee.

2- Assistant Prof. Dr. Alaa H. Ali, Materials Eng.-University of Technology, Member.

3- Assistant Prof. Dr. Alaa A. Abdulhameed, Materials Eng.-University of Technology, Member.

4- Assistant Prof. Dr. Fadhel A. Resen, College of Science – University of Technology, Supervisor.

5- Assistant Prof. Dr. Fadhel A. Hasheem, Materials Eng.-University of Technology, Supervisor.

The committee awarded the student a very good degree.

Participated on Comprehensive Exam  for Dentistry College’s Students (Ph.D. stage) – University of Baghdad

 On 26/11/2015, Assistant Prof. Dr. Alaa Abdulhasan Atiyah ( UOT Vice President for Scientific Affairs), Assistant Prof. Dr. Jawad Kadhim Oleiwi (Head of Materials Eng. Department) and Assistant Prof. Dr. Ahmed M.H. Abdulkadhim Al-Ghaban (Head of Ceramics and Building Materials Engineering Branch) participated on comprehensive exam  for dentistry college’s students (Ph.D. stage) – University of Baghdad.

ICMAE Conference

On 23/11/2015 Assistant Prof. Dr. Alaa H. Ali participated on the 5th International Conference in Mechanical Engineering (ICMAE)/ Germany with scientific article entitle “Investigation and comparison the mechanical behavior of 30Sn and SAC30S as lead and lead-free solder alloy in compression process”, for period 28 – 29/11/2015

Work Shop

On 23/11/2015, Assistant Prof. Dr. Jawad K. Oleiwi (the Head of Department) participated on work shop which organized by Information and Communication Technology Center and Computer Center about optical cable project.

The Festival ( 4th Tuff)

On 11/19/2015, Participated Prof. Dr. Jawad K. Oleiwi a head of the Department of Materials Engineering at the Festival (4th Tuff) which was held under the auspices of Prof. Dr. Amin Daway Thamir president of the University of Technology, which was held on the University Theater

Training Course

 Numerous of academic staff at Materials Eng. Department-University of Technology (Assistant Prof. Dr. Layth Qays Abbas - Deputy dean of administrative affairs, Assistant Prof. Dr. Abass Khamas Husin -Head of general materials engineering branch and Assistant Prof. Majid H. Abdulmajeed) participated in giving course about “ Destructive and Nondestructive tests for Metals” in Continuous Education Center at University of Technology for period 15-19/11/2015.

Certification of Participation

Assistant Prof. Dr.  Farhad  M. Othman and Assistant Prof. Dr. Alaa Alaa Alddin awarded Certification of participation from 5th International Conference of Nanotechnology and Advanced Materials at University of Technology for period 3-4/11/2015. They participated by the paper entitled “Characterization of Hybrid Nano Powder in Building Applications” .

Ph.D Dissertation Discussion

On 15/11/2015, Ph.D. Dissertation has been discussed entitled "Fabrication and Characterization of Artificial Esophagus by Shape Memory Alloy" submitted by the Eng. Manar A.Najim which took place in postgraduate studies hall at Materials engineering department.

                        The dissertation was linguistically reviewed by Assistant Prof. Dr. Zuhair G. Abulameer and scientifically by Assistant Prof. Samer Ali Ameer.

The committee of discussion consisted of the following lecturers:
1- Prof.  Dr. Fadhil A. Chyad, Materials Eng.-University of Technology, Head of the committee.

2- Prof.  Dr. Nahi E. Easeen, Al-Mustansiriya University- Iraqi Center of Cancer Researches,  Member.

3- Assistant Prof. Sadeq  J. Abass, Al- Nahrain University- Department of Medical Eng., Member.

4- Assistant Prof. Dr. Sohama E. Saleh, Materials Eng.-University of Technology, Member.

5- Assistant Prof. Dr.  Farhad  M. Othman, Materials Eng.-University of Technology,, Member.

6- Assistant Prof. Dr. Akram R. Jabr, Materials Eng.-University of Technology, Supervisor.

7- Assistant Prof. Dr. Emad S. Abdulkareem, Materials Eng.-University of Technology, Supervisor.

8- Assistant Prof. Dr. Ahmed M. Hamza, Iraqi Center of Cancer Researches,  Supervisor.

The committee awarded the student an excellent degree.

Blood Donation

On 11/11/2015 Numerous of employees at Materials Eng. Department donated by their blood drive within Campaign hold in University of Technology.

Nanotechnology Conference

Numerous of academic staff at Materials Eng. Department (Assistant Prof. Dr. Layth Qays Abbas - Deputy dean of administrative affairs, Assistant Prof. Dr. Akram R. Jabor and Eng. Safa Mohamed) participated in 5th Scientific International Conference of Nanotechnology and Advanced Materials and Their Applications 2015-2016 by the paper entitled “Effect of Environmental Temperature on Tissue of Nano Poly Vinyl alcohol fibers” which hold in University of Technology on 03/11/2015.

Eng. Ahmed Hashim achieves the first sequence on university and department for 2014/2015 year

On 12/10/2015 Engineer Ahmed Hashim got an award from the Prof. Dr. Amin Daway Thamir ‘President of the University of Technology’ due to achieve the first sequence on university and department for 2014-2015 year.

Award

On 12/10/2015 a number of academic staff at Materials Eng. department (Assistant Prof. Dr. Jawad Kadhim Oleiwi, Prof. Dr. Fadhil A. Chyad, Assistant Prof. Dr. Saad B. H. Farid, Assistant Prof. Dr. Rana Afif Majed and Assistant Lec. Alaa A. Mohammed) got an award for publication many papers in depended scientific journals from the Prof. Dr. Amin Daway Thamir ‘President of the University of Technology’.

M.Sc Dissertation Discussion

On 28/10/2015, M. Sc. Dissertation has been discussed entitled "Fabrication and Characterization of Nanopowder for Industrial Application" submitted by the Mustafa M. Saleh which took place in postgraduate studies hall at Materials engineering department.

            The dissertation was linguistically reviewed by Assistant Prof. Dr. Samer A. Amen and scientifically by Assistant Prof. Dr. Amel S. Merza.

The committee of discussion consisted of the following lecturers:
1- Prof. Dr.  Mohamed M. Salman, Department of Building and Construction Eng. – University of Technology, Head of the committee.

2- Assistant Prof.  Dr.  Saad B. H. Farid, Materials Eng. Department – University of Technology, Member.

3- Assistant Prof. Dr. Alaa Hasan, Materials Eng. Department – University of Technology, Member.

4- Assistant Prof. Dr. Farhad M. Othman, Department of Materials Engineering - University of technology, Supervisor.

5- Assistant Prof. Dr. Alaa A. Abdulhameed, Department of Materials Engineering - University of technology, Supervisor.

The committee awarded the student an excellent degree.

Ph.D Dissertation Discussion

On 27/10/2015, Ph.D. Dissertation has been discussed entitled "Investigation the behavior of metal matrix composite as bioimplant" submitted by the Lec. Sura A. Muhsin which took place in postgraduate studies hall at Materials engineering department.

            The dissertation was linguistically reviewed by Prof. Dr. Arkan Khalkhal and scientifically by Assistant Prof. Dr. Ali S. Hammood.

The committee of discussion consisted of the following lecturers:
1- Prof. Dr.  Khadim F. Al-Sultani, College of Materials Eng., Babylon University, Head of the committee.

2- Prof.  Dr.  Hareth I. Jaffer, College of Science - University of Baghdad, Member.

3- Assistant Prof. Dr. Alaa A. Atiyah, Materials engineering department – University of Technology, Member.

4- Assistant Prof. Dr. Entesar Gamel Ebrahim, College of Dentistry - University of Baghdad, Member.

5- Assistant Prof. Dr. Dr. Abbas K. Husain, Department of Materials Engineering -University of technology, Member.

6- Assistant Prof. Dr. Jawad K. Oleiwi, Department of Materials Engineering - University of technology, Supervisor.

7- Assistant Prof. Dr. Rana Afif Majed, Department of Materials Engineering - University of technology, Supervisor.

The committee awarded the student an excellent degree.

Meeting

On 11/10/2015, Assist. Prof. Dr. Saad B. H. Farid & Assist. Lec. Shatha R. A. Ezat attended a meeting at Ministry of Planning / The Central Organization of Standardization and Quality Control about Suggested Iraqi Standards for Imported and Locally Produced Domestic Ceramic Articles.

Al Gamaiya Channel highlighted the patent of many academic staff from Materials eng. Department

On 11/10/2015, Al Gamaiya Channel highlighted the patent of many academic staff from Materials eng. Department. This channel met Assi. Prof. Dr. Rana A. Majed, Lec. Dr. Mohammed A. Hussein and Assis. Lec. Hiba Anwer to talking about the patent “Ethanolic extract of cinnamon stems as inhibitor in oil medium”. The meeting focused the important of the study, what is the benefited side, the difficulty of the experimental work, availability of instruments and the results which obtained through adding four different concentrations of extract and the protection efficiency obtained at service temperatures of light naphtha unit in Al-Dura refinery. In the end of meeting, the head of department “Assistant Prof. Dr. Jawad K. Oleiwi talked about the scientific support to increase scientific sobriety for researches.

M.Sc Dissertation Discussion

On 11/10/2015 a discussion of M.Sc. dissertation entitled "Erosion wear behavior of composites reinforced by nanomaterials" submitted by the student Tamara Raad has been discussed at Materials engineering department.
The committee of discussion consisted of the following lecturer:
1- Assis. Prof. Dr. Mohammed S. Hamza, Materials engineering department / university of technology (Head of the committee).
2- Assis. Prof. Dr. Khadhem Kamel, College of engineering / Al-Mustansaria University (Member).
3- Assis. Prof. Dr. Mohammed A. Hussein, Materials engineering department / university of technology (Member).
4- Assis. Prof. Dr. Aseel Basim Abdul Hussain, Materials engineering department / university of technology (Supervisor).
5- Assis. Prof. Dr. Fadhil A. Hashim, Materials engineering department / university of technology (Supervisor).
The student has been got very good degree.

M.Sc Dissertation Discussion

On 08/10/2015, Assistant Prof. Dr. Abass Khamas Husin ‘Head of general materials engineering branch-Department of Materials Eng.’ participated in M.Sc. dissertation discussion at College of engineering – University of Baghdad which entitled “Optimization of process parameters for friction stir welding and processing of aluminum alloys” for student Hiba Khaleed Husien.

M.Sc Dissertation Discussion

On 08/10/2015 a discussion of M.Sc. dissertation entitled "Fabrication of advanced concrete material" submitted by the student Ahmed Saad has been discussed at Materials engineering department.
The committee of discussion consisted of the following lecturer:
1- Assis. Prof. Dr. Hassan H. Jony, Building and construction engineering department / university of technology (Head of the committee).
2- Assis. Prof. Dr. Alaa A. Abdel-Hamead, Materials engineering department / university of technology (Member).
3- Assis. Prof. Dr. Bassma M. Fahad, College of engineering / Al-Mustansaria University (Member).
4- Assis. Prof. Dr. Alaa A. Atiyah, Materials engineering department / university of technology (Supervisor).
5- Assis. Prof. Dr. Saad B. H. Farid, Materials engineering department / university of technology (Supervisor).
The student has been got excellent degree.

Participation in the 3rd international conference of laser institute for postgraduate – University of Baghdad

On 07/10/2015, Assistant Prof. Dr. Alaa A. Abdel-Hamead, academic staff in department of Materials Engineering, participated in 3rd international conference of laser institute for postgraduate – University of Baghdad by the paper entitled
Study some structured and optical properties for nano copper films

Patent

On 01/10/2015, numerous of academic staff at Materials Eng. department, Assistant Prof. Dr. Rana A. Anaee, Lec. Dr. Mohammed A. Hussein and Assistant Lec. Hiba Anwer got a patent No. 4338 which entitled:
Ethanolic extract of cinnamon stems as inhibitor in oil medium.
This patent discusses the using of natural material as inhibitor in petroleum medium obtained from Al-Dura refinery as a part of applying new technology consists of green chemistry and sustainability by adding available locally materials with safety for users in oil field.

M.Sc Discussion

On 06/10/2015, M. Sc. Dissertation has been discussed entitled "Manufacturing Conductive Polymer by Technology Twines Electronic" submitted by the student Noor M. Jalal which took place in postgraduate studies hall at Materials engineering department.

The committee of discussion consisted of the following lecturers:

1. Assist. Prof. Dr. Ezat M. Essa, College of Science / University of Baghdad, Head of the Committee.

2. Assist. Prof.  Dr.  Emad S. Abdulkareem, Department of Materials Engineering / University of Technology , member.

3. Assist. Prof. Dr. Dr. Ahmed Mohammed Al-Ghaban, Department of Materials Engineering / University of Technology, member.

4. Prof. Dr. Fadhil A. Chyad, Department of Materials Engineering / University of technology, Supervisor.

5- Assist. Prof. Dr. Akram R. Jabr, Department of Materials Engineering / University of technology, Supervisor.

The committee awarded the student   excellence degree.

Symposium

On 30/09/2015, Assistant Prof. Dr. Farhad M. Othman attended scientific symposium about “the Competitive Exam of Medical Group Colleges Students” at Control and Systems Engineering Department / University of Technology.

Competitive Exam

On 04/10/2015, Scientific assistant of department “Assistant Prof. Dr. Farhad M. Othman”, followed the competitive exam of medical group colleges students. Also many academic staff from materials engineering participated in this exam Assistant Prof. Dr. Alaa H. Ali, Lec. Dr. Ayad K. Hasan and Assistant Prof. Sarmad E. Ibrahim.

Symposium

On 04/10/2015, the department of Materials Engineering hold a symposium about the three branches in the department. The symposium program contains a lecture of head of department in addition to meeting with Administrative assistant of department Assistant Prof. Dr. Laith K. Abbas.

Beginning of New Academic Year 2015-2016

At the beginning of new academic year 2015-2016, the head of department “Assistant Prof. Dr. Jawad K. Oleiwi” visited the undergraduate students halls to follow the lectures, attendance of students and applying the instructions of Ministry of higher education and scientific research.

M.Sc Discussion

On 01/10/2015, M. Sc. Dissertation has been discussed entitled "Estimation of Corrosion Control by Nanoparticles Coating" submitted by the student Doua Ayed Abdullah which took place in postgraduate studies hall at Materials engineering department.

The committee of discussion consisted of the following lecturers:

1. Assist. Prof. Dr. Sami Abualnoun Ajeel, UOT Vice President for Administrative Affairs, head of the committee.

2. Assist. Prof.  Dr.  Ahmed Qasim, College of Science-University of Baghdad, member.

3. Assist. Prof. Dr. Dr. Abbas K. Husain, Department of Materials Engineering-University of Technology , member.

4. Assist. Prof. Dr. Rana Afif Majed, Department of Materials Engineering-University of technology, Supervisor.

5- Assist. Prof. Dr. Ahmed Mohammed Al-Ghaban, Department of Materials Engineering-University of technology, Supervisor.

The committee awarded the student a very good degree.

Participation in the International 3rd Conference of the Faculty of Sciences / University of Karbala

Assistant Prof. Dr. Akram R. Jabur from Materials Engineering – University of Technology participated in The international 3rd Scientific Conference of the College of Science 2015 at University of Kerbala by the paper entitled “The Effects of Operating Parameters on The Morphology of Electrospun Polyvinyl alcohol Nanofibres” which published in Journal of University of Kerbala as a part of proceeding of above conference.

The Head of Department / Agency and co-authors  Published  Two Papers

On 26/09/2015, Engineering and Technology Journal published two scientific papers for academics staff Assi. Prof. Dr. Jawad K. Oleiwi, Assi. Prof. Dr. Emad S. Al-Hasani and Lec. Alaa Abd Mohammed entitled “Experimental Investigation and Mathematical Modeling of Tensile Properties of Unsaturated Polyester Reinforced by Woven Glass Fibers”, in Vol.32, No.3 and "Modeling and Buckling Analysis of Polyester Composite Columns" in Vol.32, No.5.

Publish a Paper

On 26/09/2015, Conducted Lec. Alaa Abdul Mohammed Academic Staff in the Department of Materials Engineering published two papers in the two magazines:

Also, Iraqi Journal for Mechanical and Materials Engineering in University of Babylon entitled “Study the Thermal Properties and Water Absorption of Composite Materials Reinforced with Data and Olived Seeds” in Vol.15, No.2, 2015.

Publish a Paper

On 25/09/2015, Assistant Prof. Dr. Suhama I. Salih, Assistant Prof. Dr. Jawad K. Oleiwi and Lec. Dr. Qahtan A. Hamad published in Engineering and Technology Journal a scientific paper entitle “Numerically and theoretically studying of the upper composite complete prosthetic denture” in Vol. 33, No. 5, 2015.

Scientific Reviewing

On 03/09/2015, Academic staff Sura Salim Ahmed reviewed a paper for Nuclear Science and Techniques (NST) journal. This journal is sponsored by Shanghai Institute of Applied Physics, Chinese Academy of Sciences and has been indexed by SCI-E, CA in US, SA in UK and PЖ in Russia.

Publish a Paper

On 02/09/2015, Assi. Prof. Dr. Emad Saadi Al-Hassani in department of Materials Engineering published a paper in international journal “Wulfenia”. The title of paper is “Effect of (Ta & Nb) on corrosion behavior of Nitinol” which published in Volume 22, No. 6, 2015.

Publish a Paper

On 23/09/2015, Engineering and Technology Journal published a scientific paper for two academic staff Assi. Prof. Dr. Farhad M. Othman and Assi. Prof. Dr. Alaa A. Abdulhameed entitled “Study of ZnO, SnO2 and compounds ZTO structures synthesized for gas-detection” in Vol.33, No.6, 2015.  Also, Iraqi Journal for Physics in University of Baghdad for above academic staff a paper entitle “A study of Zn:Sn mixing ratio effect on the gas detector properties” in Vol.13, No.27, 2015.

Invite for Graduates from the University Presidency

Department of Materials Engineering that invitation for graduates for the academic year 2015/2014 on the occasion of their graduation and invite them to attend the central graduation ceremony which will be held on the University Square celebrations in the third hour and a half on the afternoon on Monday, 10/12/2015. It is incumbent upon the graduates Review Division in the department stores for the purpose of receiving their graduation robes starting from the day on Thursday 01/10/2015.

The Head of Department / Agency congratulates the faculty members to mark Eid Al-Adhah Al-Mobarak

Head of Department / Agency congratulates the members of the faculty respected and all the engineers, technicians and administrative staff in our department to mark Eid al-Adha, wishing God to lift this crisis for our beloved country and wishes them superiority and continuing success in the scientific and practical careers and that the prevail security and safety and saves beloved Iraq from all harm.

Ph.D. Degree

Dr. Jamal Jalal got Ph.D. degree in Mechanical Engineering from University of Savitribai Phule Puna in India, which reviewed from Iraqi Ministry of higher education & scientific research in 15/09/2015.

M.Sc Discussion

Scientific assistant of Department “Assistant Prof. Dr. Farhad M. Othman participated in discussion for M.Sc. student “Zahraa N. Jasem” at Al-Mustansiriya University-College of Science in 10/09/2015.

Patent

Assistant Prof. Dr. Rana A. Anaee got a patent in “Corrosion Inhibition of Carbon Steel by Dibutylamine and Cyclohexylamine in Oil Medium Containing Hydrogen Sulphide in Separation Vessel (Vacuum distillation unit) at Al-Durra Refinery” from Ministry of Planning / The Central Organization of Standardization and Quality Control. Patent No. 4259, C23F11/141, DOI: 10.13140/RG.2.1.3159.3448.

Participation

 Assist. Prof. Dr.  Saad B. H. Farid & Assist. Lec. Shatha R. A. Ezat attended a meeting at Ministry of Planning / The Central Organization of Standardization and Quality Control about Suggested Iraqi Standards for Imported and Locally Produced Domestic Ceramic Articles.

Symposium

On 16/09/2015, Assistant Prof. Dr. Jawad K. Oleiwi attended scientific symposium “Efficiency for performance of electric generator in south of Baghdad/2” at Department of Electromechanical Engineering/ University of Technology.

Award

 University of Babylon/College of Science presented award to Prof. Dr. Fadhil A. Chyad for participate him in Ph.D. discussion for student “Rahim Abd Jabar Hamddan”.

Ph.D Discussion

: Prof. Dr. Fadhil A. Chyad participated in Ph.D. discussion for Ph.D. student “Rahim Abd Jabar Hamddan” at University of Babylon/College of Science in 15/09/2015.

Publish Research

Lec. Dr. Ayad K. Hassan published an article in International journal ‘American Journal of Mechanics and Applications’ with ISSN: 2376-6115. This article entitles “Correlations for Nusselt Number in free convection from an isothermal inclined square plate by numerical simulation”.

Publish Research

The head of department “Assistant Prof. Dr. Jawad K. Oleiwi” published an article in International journal ‘Wulfenia’ which indexed by Thomson Reuters (IF:1.31). The article entitle: Fabrication, characterization and Physical Properties of Functionally Graded Ti/HAP Bioimplants. This article focuses functionally graded materials Ti/HAP which fabricated at n=0.8, 1 and 1.2 and characterized of by XRD and SEM to evaluate the formed layers in FGMs. Some physical properties were measured for fabricated FGMs include particle size analysis, apparent density, green density, green porosity and shrinkage.

Final Examinations for the Second Round

on  02/09/2015  the final examinations for the second round started in materials engineering department .the acting head of the department , Dr. Jawad  K. Oleiwi   accompanied by his administrative assistant  and the head of examinations committee   oversaw the proceedings of this examinations ,he also had a tour  inside the examinations halls and checked the nature of examinations questions  and wished the students success.

Ph.D. Dissertation Discussion

 on  27/08/2015 a discussion of Ph.D. dissertation entitled "Manufacturing and characterization of polymeric blends advanced nanoscale overlapping" submitted by the student Audaa  J.Braihi  .took place in materials engineering department.

the committee of discussion consisted of the following lecturers :

1)PRo.Dr.Muhsan J.Jwaij ,college of engineering /university of nahrain ,head of the committee

2)Assis.PRo.Dr.Najim A. Saeed  ,college of materials engineering / university of Babylon , member

3) Assis.PRo.Dr.Qusai F.Abdul-Hameed   ,chemical engineering department / university of technology , member

4) Assis.PRo.Dr.Jawad K.Oleiwi  ,materials engineering department / university of technology , member

5) Assis.PRo.Dr.Akram R.Jabar  ,materials engineering department / university of technology , member

6) Assis.PRo.Dr.Sohama E.Saleh  ,materials engineering department / university of technology , supervisor

7) Assis.PRo.Dr.Fadhil A.Hashim ,materials engineering department / university of technology , supervisor

the discussion took place at postgraduate studies hall of materials engineering department ,and the student awarded excellent degree.

Delegation

on  06/08/2015 and according to the program of scholarships  of high committee of developing higher education in Iraq , Assis. Lec. Ali A.Muhsan  had been delegated to complete doctoral study  in materials engineering at university of dayton in USA

M.Sc. Dissertation Discussion

on 26/07/2015 a discussion of M.Sc. dissertation entitled "manufacturing and characterization of pylon of artificial lower limb composite materials "submitted by the student  Shaimaa J.Ahmed  took place at materials engineering department .

the committee of discussion consisted of the following lecturer :

1)  Assis.PRo.Dr.Sohama E.Saleh  ,materials engineering department / university of technology , head of the committee

2)Assis.PRo.Dr.Ali H.Muhammed ,college of engineering / university of nahrain , member

3)Assis.PRo.Dr.Laith Q.Abbas , materials engineering department / university of technology , member

4) Assis.PRo.Dr.Jawad K.Oleiwi  ,materials engineering department / university of technology supervisor

the student awarded excellent degree

M.Sc. Dissertation Discussion