On 24/1/2018  the graduate student (Masters) Russul Salah Hadi discussed entitled her thesis entitled:

(Use of auxiliary materials in the chemical recycling of waste water bottles and their use in industrial applications)

The discussion committee consisted of the listed gentlemen

1. Asst.Prof. Kadhem Mutter Shebeb  Univesity of technology\Department of Materials Engineering  Head of committee
2. Asst.Prof, Saad Hanash Ammar University of Nahrain   College of engineering. Member
3. Asst.Prof. Mohammed Ramaid Gharkan Univesity of technology\Department of Materials Engineering Member
4. Asst.Prof. Bissam Ibrahim Khalil Univesity of technology\Department of Materials Engineering Supervisor
5. Asst.Prof. Kadhem Mohamed Abdul Hussein Univesity of technology\Department of Materials Engineering Supervisor

The study examined how mono meres were manufactured by recycling plastic water bottles using auxiliary materials using zinc oxide in two types (94.55) and with different weights (0.5,0.25,0.15 g) and using two types of nano-magnesium oxide and effective thinner with different weight ratios The use of a closed glass system at 190 ° C and the study of the effect of the ratio of the catalyst, the reaction time and the yield of the resulting material, and the analysis of the elements (carbon, hydrogen and nitrogen) ,The results showed that zinc oxide (55) was more productive and effective than the zinc oxide nanotubes (94) due to the large surface area of the nanotube zinc oxide (55) and reduced the reaction time to one hour instead of (7) hours and without the use of auxiliary materials using a simple closed system and economic costs

The thesis was evaluated scientifically by Prof.D.Kazem Kamel Rassen / University of Mustansiriya / Faculty of Engineering and linguistics by Prof. Dr. Akhtar Khallakal Hussein / University of Technology / Department of Mechanical Engineering.
The discussion was held at the Graduate Hall / Building C and the discussion committee was granted a Master's degree for the student.

On 8/1/2018, a group of teachers of the Materials Engineering Department / University of Technology has been working on scientific research to participate in the Tmress Confrence Series, to be held in early February in Beirut, Lebanon. The title of the first research presented by Asst.Prof.Dr. Ala’a Alla al-Din (Characteristics of Thin Films of SnO₂ Deposited by Thermal Chemical Spraying Using Different Salt Solutions). In this Paper, the thermal chemical spraying method was used with one atomizer and two nozzle (SN, DN). The thin tin oxide membranes were formed in different structures. The tin oxide membranes were prepared at a concentration of 0.005M and their thickness was about 0.2 - 0.002 μm. Microscopic examination of the membranes, in addition to optical transparency and to the contact angle. The results showed that the membranes were crystallized with a four-angular structure with tiny micro-structures from plates to columns and clusters resembling cast.

The second research presented by Asst.Prof.Assel Basem  (Natural fiber recycling and use in green cement mortar) to the process of manufacturing environmentally friendly cement mortar consisting of natural waste (coconut fiber, banana fiber, papyrus fiber, and palm fiber). Various additives (0 - 0.25 - 0.50-0.75-1 g) Natural waste (plant fiber) was the partial replacement of cement, mechanical properties and thermal conductivity. It was found that the increase of additives from natural waste increases the strength of the pressure and the hardness of cement mortar and the lack of thermal conductivity properties and water absorption. a To take advantage of these wastes and recycling instead of burning them.

Al-Yamamah , Publishing and Distribution published a scientific book entitled "Transformations in Engineering Materials".Prof.Dr. Abbas Khamas Hussain Teaching in Materials Engineering / University of Technology. The third chapter deals with the process of synthesis. The fourth chapter focuses on the process of growth. Chapter 5 deals with the applications of transitions and ends with Chapter 6, which included a set of questions and questions.

- On 28/12/2017, the Head of Materials Engineering Department / Ahmed Mohamed Hassan Al-Ghabban on the book of thanks number 63 on 2/1/2018 by the President of the University of Technology Amin Douai Thamer Tomena for the efforts made and distinguished in the success of the specialized symposium tagged (Instructions for new scientific promotions No. 167 of 2017)

 - On 19/12/2017 Prof. Dr.. Ali Hussein Ateey Teaching in the Department of Materials Engineering / University of Technology on the book of thanks and appreciation number 6656 on 19/12/2017 by Asst.Prof.Dr . Mohammed Said Abdul-Zahra, Dean of the Faculty of Medicine / University of Kufa in recognition of his great efforts and support to the Faculty of Medicine in the forums of the Council of the University of Kufa and his guidance in changing the curriculum and wish him success and success.

- On December 28, 2017, Asst.Prof Laith Qais Abbas rescived Aknowledgement number 67 on 2/1/2018 by the President of the University of Technology Amin Douai Thamer for the efforts made and distinguished in the success of the specialized symposium tagged (Instructions for new scientific promotions No. 167 of 2017.